Main switchboard — a guarantee of production safety

It's no secret that today almost all enterprises strive to automate all production processes. This is not surprising, the development of technology does not stand still, computerization of all spheres of life is increasingly taking place, which actually allows us to make all processes automatic.

If earlier a large number of specialists were required in an enterprise who did all the work, today their number tends to zero, but the number of automatic lines is increasing. However, this approach has many advantages, because the machine, as you know, is often able to perform the work much more accurately and quickly than a person. In addition, the technology is practically not affected by external factors unrelated to the work process, which is also important.

Almost any conveyor production of any small products today is based only on the work of automated machines, each of which performs its specific role.The person here is assigned the role of a controller, who monitors only the quality of the execution of certain work and the servicing of the device. In this regard, as already mentioned, the role of a person in the enterprise becomes less significant. Of course, its complete absence cannot be allowed.

We all know that every technique can fail from time to time. And although it is practically unaffected by external conditions, there are still things on which it directly depends. For example, even today's high-tech automated metal cutting machines with programmed control will still not be able to function without electricity. That is, in fact, at the expense of electricity, the work of the entire enterprise is carried out as a whole.

It is also worth remembering that with sudden voltage fluctuations in electrical circuits, all kinds of damage, interruptions and short circuits can occur, leading not only to equipment malfunctions, but sometimes to serious accidents in the enterprise, which can ultimately lead to serious consequences. And in general, even the smallest voltage spikes can seriously affect the quality of work of CNC machines, since malfunctions in the functioning of monitoring equipment can disrupt the technological process, and the whole batch of industrial goods will simply go to waste.

So, since today's production is fully automated, even the smallest problems with electricity should not be tolerated. In this regard, the main switchboards are installed in all enterprises and production facilities.The main function of such panels is the reception, production, transmission and distribution of electricity. In other words, first all electricity goes to the switchboard, and from there it is sent to all stages of production. The main advantage of such panels is that they are able to protect the enterprise from short circuit and overload.

As a rule, if any emergency, overload or short circuit occurs, the panel simply automatically shuts down, that is, it cuts off the power supply. Of course, stopping the technological process is also a very unpleasant factor, but at least thanks to the switchboard you will not have to remove the sad consequences of an accident. It is also worth noting that, as a rule, the main boards have a special light indication, with the help on which even an untrained electrician can easily understand where the fault occurred.

Summarize. In fact, installing the main switchboard in all the main process chains, in workshops and on production lines can save you from losses and big losses. Modern technologies are extremely vulnerable to incorrect network voltage and are often installed in workshops and premises where the installation of electrical networks was carried out many years ago. The price of such machines and equipment is often very high, so it is hardly worth risking its functionality, since even due to the failure of one device, the enterprise will suffer significant losses. Installing distribution points where necessary will cost you much more economically.

.