Electrical enclosures

Special electrical boxes are used to install power equipment and assemble switchgear. These products are also used in switchboard electrical installations, they are able to protect the network from overload and the effects of short circuits.
All electrical equipment enclosures are designed for use at rated current conditions (not more than 630A in AC mains) with earthed neutral phase. If it is necessary to place the enclosures in conditions of higher current strength, then the entire set of electrical cabinets is formed with additional elements. All enclosures of this type are equipped with a special frame that serves as a necessary mounting element. Sometimes the electric door can be split. There may be special purpose devices here.
Only high-alloy steel with a thickness of at least 1.5 mm is used for the manufacture of electrical boxes. Quite often, the products are foldable, and the side and back panels can be removed from them.The production of this type of product is a high-tech process, taking place under the strict supervision of specialists and with strict observance of the sequence of metal processing stages.

One of the technologies used in the production of casings is the bending of sheets. This type of work allows you to produce high-quality parts that are part of the overall design. Parts obtained with this treatment are reliable and durable. They are distinguished by high accuracy and aesthetic appearance. Modern equipment is not controlled by humans, but by electronics. This allows the production of the most complex parts from a sheet of any metal alloy (not only high-alloy steel). The main criterion for an alloy is the required plastic properties.
Parts made using this technology have a higher level of reliability and durability. This type of operation is much cheaper, more efficient and more accurate. This is very important in the production of products such as electrical boxes.
It is worth noting that although high-quality steel is used for electrical boxes, these products are sensitive to atmospheric conditions. Therefore, these conditions are the main factor in the selection of equipment. One must clearly understand what environmental conditions will affect it and make the appropriate choice.